| Brand |
|---|
KEY FEATURES
- universal output sockets
- 6 Output and 4 USB
- cable length 1.8meters
- Input Plug - British type
Mercury Elite 100, 12V 100AH Battery
Additional information
Reviews (0)
Shipping & Delivery
Related products
Mercury Elite 2000VA UPS
| Rating input voltage | 2000 VA / 1200 W |
| Rating input frequency | 60/50Hz (auto sensing) |
| Input phase | Single-phase |
| Input socket | With Fuse |
| Cold Start (0 to 100% load) | Press the ON/OFF Switch |
| Input Range (220V) | 140-300 |
| Rating output(VA) | 2000 |
| Rating output (W) | 1200 |
| Power factor | 0.6 |
| Rating output voltage (V) | 220 |
| Waveform | Battery mode (simulated sine wave), AC mode(sine wave) |
| AC Voltage Regulation | ±10% (Battery mode) |
| Rear output socket | 4 x Universal – Battery backup |
| Waveform | Simulated Sine Wave (Battery mode) |
| Line Mode | Synchronize with the utility |
| Rating frequency | 60Hz or 50 Hz ± 1 Hz |
| Battery Mode | Yellow flashing |
| Short circuit protection Line Mode | Fuse & Firmware protection |
| Short circuit protection Battery Mode | Firmware Protection |
| Overload protection Line Mode | 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately. |
| Overload protection Battery Mode | 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediately |
| Indicators AC mode | Green Lighting |
| Indicators Battery Mode | Yellow Flashing |
| Indicators Fault | Red Lighting |
| Alarm Battery Mode | Sounding every 10 Seconds |
| Alarm Low Battery | Sounding every Second |
| Alarm Overload | Sounding every 0.5 second |
| Alarm Fault | Continuously sounding |
| Full Protection | Overload, discharge, and Overcharge protection |
| Transfer Time | Typical 2-6ms, 10ms max. |
| Transfer Time | Typical 2-6ms, 10ms max. |
| Communication Interface | Optional RS232/RJ11 |
| Battery and runtime Rating | 2 X 12V/9AH |
| Recharge time – Typical | 6-8 hours recover to 90% capacity |
| Charge current | About 1A at normal mode. |
| Dimension, W X H X D (cm) | 22.5 X 12.5 X 39 |
| Net Weight (kgs) | 12.7KGS |
| Humidity | 0-90 % RH @ 0- 40°C (non-condensing) |
| Noise Level | Less than 45dB |
| Compatible with OS | Supports Windows® 2000/2003/XP/Vista/2008/7 |
| Communication interface | Elite 2000pro (N/A), Elite 2000ipro (USB/RJ11) |
Mercury Maverick 850VA UPS
Input voltage 220VAC
Input frequency 50Hz
Input phase Single phase
Input socket With Fuse
Cold Start (0 to 100% load) Press the ON/OFF switch
Input range (220V) 140V-300V
Rating output (VA). 850VA
Rating output (W). 510W
Rating output (W). Battery mode(simulated sine wave),
AC mode (sine wave)
Power factor 0.6
Rating voltage 220V
Output range 220Vac-7%+15% ( in battary mode )
Rear Output Socket 2xUniversal - Battery backup
Transfer time TYPICAL 4-8 ms
Communication Interface NIL
Rating frequency 50Hz
Output Frequency Line-mode Synchronize with the Utility
Battery mode 50 Hz±1Hz
Output Frequency Line Mode Synchronize with the utility
Short Circuit Protection Line Mode FUSE & firmware protection
Battery Mode Software protection controlled by firmware
Overload Protection Line Mode 110%+-5% (Go to fault mode after 5 minutes),
120%+-5% (Go to fault mode immediately)
Battery Mode 110%+-5% (Shutdown after 5 minutes)
120%+-5% (Shut down immediately)
Rating frequency 12V/9AH x 1
Backup Tim - Typical 10mins to 18mins
(depending on load)
Charge Current About 1A at normal mode
Over Charge Protection >14.5V +/- 0.2V stop charging
Weight 5.6kg +/- 0.3Kg
Dimension 390x 145 x 220 (mm)
Mercury HP9110C-S 10KVA Online UPS
Specifications
| Power | 10KVA / 7000W |
| Voltage range | 176 ±5VAC~276 ±5VAC, |
| Frequency | 46~54Hz ±0.5Hz, or 56~64Hz ±0.5Hz auto-sensing |
| Input phase | Single-phase |
| Power factor | ≥0.98 |
| Voltage range | 220VAC ±1% |
| Output phase | Single-phase |
| Frequency | 50Hz ±0.2% (battery mode) |
| THD | < 2% (Linear load); < 6% (non-Linear load) |
| Overload | 105%~130% 10min turn to Bypass mode, > 130% 1s turn to Bypass mode |
| Crest factor | 3:1 (max) |
| Waveform | Pure sine wave |
| Transfer time | 0ms (AC mode – Battery mode) 0ms (AC mode – Bypass mode) |
| Efficiency | ≥88% |
| AC mode | 5 cycles turn off the inverter, no transfer to Bypass, provide alarm. |
| Battery mode | 5 cycles turn off the inverter, provide an alarm. |
| Bypass mode | Input fuse has blown or break action. |
| Battery Model | 12V sealed lead acid maintenance-free |
| DC voltage | 240VDC |
| Configuration | 20x 12V/8.2AH |
| Backup time | 13min (half load) / 5min (full load) |
| Charge current | 1A (standard unit) / 5A (long time unit) |
| Recharge time | 90% capacity after 8hrs charging |
| Communication Interface | RS232; SNMP (optional) |
| Parallel Port | Parallel availability for redundancy and load sharing up to three-units |
| LCD Indication | Input voltage/frequency; battery voltage; output voltage/frequency; load watt/VA value & percent; inverter temperature; operation mode such as “on batt” or “on bypass” |
| LED Indication | Green: normal operation; Yellow: warning condition Red: abnormal operation |
| Noise level | ≤ 55dB |
| Temperature | 0~40˚C; 0 ~ 40˚C (storage temperature) |
| Humidity | 0~95% (non-condensing) |
| Altitude | < 1500m |
| Weight Net/Gross | 92/107kg (standard unit); 36/51kg (long time unit) |
| Dimension (WxDxH) | 270 x 570 x 720mm |
| Packaging (WxDxH) | 370 x 670 x 940mm |
Reviews
There are no reviews yet.