| Brand |
|---|
Additional information
Reviews (0)
Shipping & Delivery
Related products
Mercury HP9110C-S 10KVA Online UPS
Specifications
| Power | 10KVA / 7000W |
| Voltage range | 176 ±5VAC~276 ±5VAC, |
| Frequency | 46~54Hz ±0.5Hz, or 56~64Hz ±0.5Hz auto-sensing |
| Input phase | Single-phase |
| Power factor | ≥0.98 |
| Voltage range | 220VAC ±1% |
| Output phase | Single-phase |
| Frequency | 50Hz ±0.2% (battery mode) |
| THD | < 2% (Linear load); < 6% (non-Linear load) |
| Overload | 105%~130% 10min turn to Bypass mode, > 130% 1s turn to Bypass mode |
| Crest factor | 3:1 (max) |
| Waveform | Pure sine wave |
| Transfer time | 0ms (AC mode – Battery mode) 0ms (AC mode – Bypass mode) |
| Efficiency | ≥88% |
| AC mode | 5 cycles turn off the inverter, no transfer to Bypass, provide alarm. |
| Battery mode | 5 cycles turn off the inverter, provide an alarm. |
| Bypass mode | Input fuse has blown or break action. |
| Battery Model | 12V sealed lead acid maintenance-free |
| DC voltage | 240VDC |
| Configuration | 20x 12V/8.2AH |
| Backup time | 13min (half load) / 5min (full load) |
| Charge current | 1A (standard unit) / 5A (long time unit) |
| Recharge time | 90% capacity after 8hrs charging |
| Communication Interface | RS232; SNMP (optional) |
| Parallel Port | Parallel availability for redundancy and load sharing up to three-units |
| LCD Indication | Input voltage/frequency; battery voltage; output voltage/frequency; load watt/VA value & percent; inverter temperature; operation mode such as “on batt” or “on bypass” |
| LED Indication | Green: normal operation; Yellow: warning condition Red: abnormal operation |
| Noise level | ≤ 55dB |
| Temperature | 0~40˚C; 0 ~ 40˚C (storage temperature) |
| Humidity | 0~95% (non-condensing) |
| Altitude | < 1500m |
| Weight Net/Gross | 92/107kg (standard unit); 36/51kg (long time unit) |
| Dimension (WxDxH) | 270 x 570 x 720mm |
| Packaging (WxDxH) | 370 x 670 x 940mm |
Mercury 150Amps Tubular Battery
150 Ah capacity, 12V
Tubular plate Technology
Uniform distribution of positive active material for long life and superior performance
Latest innovation with thick tubular plates - best suited for areas with frequent and long power cut.
Next generation tall tubular battery with better charge acceptance and long Back up
Puncture-resistant polyethylene separator which minimize the possibility of internal short circuits
It has high purity, corrosion-resistant proprietary spine alloy composition for long battery life
Best Solution for areas with long and frequent power cuts
Easy maintenance with level indicators.
Mercury EP40KVA Online UPS.
Description
Application: Small network, servers and other IT equipment High frequency and double conversion on-line technology Fully digitized microprocessor control Wide input voltage range UPS startup without battery Cold start Advanced battery management Advanced battery charge in UPS off mode Lightning and surge protection Short circuit and surge protection Fan speed auto control when loads vary Optional extension battery pack Load capacity display Smart RS232 communication with monitoring software Optional SNMP card slot
Mercury Maverick 850VA UPS
Input voltage 220VAC
Input frequency 50Hz
Input phase Single phase
Input socket With Fuse
Cold Start (0 to 100% load) Press the ON/OFF switch
Input range (220V) 140V-300V
Rating output (VA). 850VA
Rating output (W). 510W
Rating output (W). Battery mode(simulated sine wave),
AC mode (sine wave)
Power factor 0.6
Rating voltage 220V
Output range 220Vac-7%+15% ( in battary mode )
Rear Output Socket 2xUniversal - Battery backup
Transfer time TYPICAL 4-8 ms
Communication Interface NIL
Rating frequency 50Hz
Output Frequency Line-mode Synchronize with the Utility
Battery mode 50 Hz±1Hz
Output Frequency Line Mode Synchronize with the utility
Short Circuit Protection Line Mode FUSE & firmware protection
Battery Mode Software protection controlled by firmware
Overload Protection Line Mode 110%+-5% (Go to fault mode after 5 minutes),
120%+-5% (Go to fault mode immediately)
Battery Mode 110%+-5% (Shutdown after 5 minutes)
120%+-5% (Shut down immediately)
Rating frequency 12V/9AH x 1
Backup Tim - Typical 10mins to 18mins
(depending on load)
Charge Current About 1A at normal mode
Over Charge Protection >14.5V +/- 0.2V stop charging
Weight 5.6kg +/- 0.3Kg
Dimension 390x 145 x 220 (mm)
Mercury Elite 1200 Pro UPS. Country Of Origin: China
FEATURES
DSP technology for fast & smooth charging
Pure Sine Wave
Transformer Based
Auto sense intelligent charging (ASIC) adjustment
Highly robust & reliable Ideal for computers
User-selectable charging current
Generator compatible
Wide charging voltage range
Negligible battery water loss
Low Battery Warning
Overload Warning
Over Temperature protection
Short circuit protection
Backup indicator
Mercury MI 1600
Auto sense intelligent charging (ASIC) adjustment
Highly robust & reliable Ideal for computers
User-selectable charging current
Generator compatible
Wide charging voltage range
Negligible battery water loss
Low Battery Warning
Overload Warning
Over Temperature protection
Short circuit protection
Backup indicator
Reviews
There are no reviews yet.