| Brand |
|---|
Additional information
Reviews (0)
Shipping & Delivery
Related products
Mercury EP40KVA Online UPS.
Description
Application: Small network, servers and other IT equipment High frequency and double conversion on-line technology Fully digitized microprocessor control Wide input voltage range UPS startup without battery Cold start Advanced battery management Advanced battery charge in UPS off mode Lightning and surge protection Short circuit and surge protection Fan speed auto control when loads vary Optional extension battery pack Load capacity display Smart RS232 communication with monitoring software Optional SNMP card slot
Mercury Elite 2000VA UPS
| Rating input voltage | 2000 VA / 1200 W |
| Rating input frequency | 60/50Hz (auto sensing) |
| Input phase | Single-phase |
| Input socket | With Fuse |
| Cold Start (0 to 100% load) | Press the ON/OFF Switch |
| Input Range (220V) | 140-300 |
| Rating output(VA) | 2000 |
| Rating output (W) | 1200 |
| Power factor | 0.6 |
| Rating output voltage (V) | 220 |
| Waveform | Battery mode (simulated sine wave), AC mode(sine wave) |
| AC Voltage Regulation | ±10% (Battery mode) |
| Rear output socket | 4 x Universal – Battery backup |
| Waveform | Simulated Sine Wave (Battery mode) |
| Line Mode | Synchronize with the utility |
| Rating frequency | 60Hz or 50 Hz ± 1 Hz |
| Battery Mode | Yellow flashing |
| Short circuit protection Line Mode | Fuse & Firmware protection |
| Short circuit protection Battery Mode | Firmware Protection |
| Overload protection Line Mode | 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately. |
| Overload protection Battery Mode | 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediately |
| Indicators AC mode | Green Lighting |
| Indicators Battery Mode | Yellow Flashing |
| Indicators Fault | Red Lighting |
| Alarm Battery Mode | Sounding every 10 Seconds |
| Alarm Low Battery | Sounding every Second |
| Alarm Overload | Sounding every 0.5 second |
| Alarm Fault | Continuously sounding |
| Full Protection | Overload, discharge, and Overcharge protection |
| Transfer Time | Typical 2-6ms, 10ms max. |
| Transfer Time | Typical 2-6ms, 10ms max. |
| Communication Interface | Optional RS232/RJ11 |
| Battery and runtime Rating | 2 X 12V/9AH |
| Recharge time – Typical | 6-8 hours recover to 90% capacity |
| Charge current | About 1A at normal mode. |
| Dimension, W X H X D (cm) | 22.5 X 12.5 X 39 |
| Net Weight (kgs) | 12.7KGS |
| Humidity | 0-90 % RH @ 0- 40°C (non-condensing) |
| Noise Level | Less than 45dB |
| Compatible with OS | Supports Windows® 2000/2003/XP/Vista/2008/7 |
| Communication interface | Elite 2000pro (N/A), Elite 2000ipro (USB/RJ11) |
Mercury EP30KVA Online UPS.
The Mercury 3-phase 30kVA online UPS brings advanced features and the superb quality and decent pricing that Mercury UPS products have stood out for. Mercury UPS series offers the best quality-price fit, giving you the opportunity to acquire high performance power backup systems at the best market price.
SPECIFICATION:
-Advanced battery management -Advanced battery charge in UPS off mode -Lightning and surge protection -Short circuit and surge protection -Fan speed auto control when loads varies -Optional extension battery pack -Load capacity display -Small network, servers and other IT equipment -High frequency and double conversion on-line technology -Fully digitized microprocessor control -Wide input voltage range -UPS startup without battery -Cold start
Mercury 150Amps Tubular Battery
150 Ah capacity, 12V
Tubular plate Technology
Uniform distribution of positive active material for long life and superior performance
Latest innovation with thick tubular plates - best suited for areas with frequent and long power cut.
Next generation tall tubular battery with better charge acceptance and long Back up
Puncture-resistant polyethylene separator which minimize the possibility of internal short circuits
It has high purity, corrosion-resistant proprietary spine alloy composition for long battery life
Best Solution for areas with long and frequent power cuts
Easy maintenance with level indicators.
Mercury HP9110C-S 10KVA Online UPS
Specifications
| Power | 10KVA / 7000W |
| Voltage range | 176 ±5VAC~276 ±5VAC, |
| Frequency | 46~54Hz ±0.5Hz, or 56~64Hz ±0.5Hz auto-sensing |
| Input phase | Single-phase |
| Power factor | ≥0.98 |
| Voltage range | 220VAC ±1% |
| Output phase | Single-phase |
| Frequency | 50Hz ±0.2% (battery mode) |
| THD | < 2% (Linear load); < 6% (non-Linear load) |
| Overload | 105%~130% 10min turn to Bypass mode, > 130% 1s turn to Bypass mode |
| Crest factor | 3:1 (max) |
| Waveform | Pure sine wave |
| Transfer time | 0ms (AC mode – Battery mode) 0ms (AC mode – Bypass mode) |
| Efficiency | ≥88% |
| AC mode | 5 cycles turn off the inverter, no transfer to Bypass, provide alarm. |
| Battery mode | 5 cycles turn off the inverter, provide an alarm. |
| Bypass mode | Input fuse has blown or break action. |
| Battery Model | 12V sealed lead acid maintenance-free |
| DC voltage | 240VDC |
| Configuration | 20x 12V/8.2AH |
| Backup time | 13min (half load) / 5min (full load) |
| Charge current | 1A (standard unit) / 5A (long time unit) |
| Recharge time | 90% capacity after 8hrs charging |
| Communication Interface | RS232; SNMP (optional) |
| Parallel Port | Parallel availability for redundancy and load sharing up to three-units |
| LCD Indication | Input voltage/frequency; battery voltage; output voltage/frequency; load watt/VA value & percent; inverter temperature; operation mode such as “on batt” or “on bypass” |
| LED Indication | Green: normal operation; Yellow: warning condition Red: abnormal operation |
| Noise level | ≤ 55dB |
| Temperature | 0~40˚C; 0 ~ 40˚C (storage temperature) |
| Humidity | 0~95% (non-condensing) |
| Altitude | < 1500m |
| Weight Net/Gross | 92/107kg (standard unit); 36/51kg (long time unit) |
| Dimension (WxDxH) | 270 x 570 x 720mm |
| Packaging (WxDxH) | 370 x 670 x 940mm |
Mercury Elite 2000VA UPS
| Rating input voltage | 2000 VA / 1200 W |
| Rating input frequency | 60/50Hz (auto sensing) |
| Input phase | Single-phase |
| Input socket | With Fuse |
| Cold Start (0 to 100% load) | Press the ON/OFF Switch |
| Input Range (220V) | 140-300 |
| Rating output(VA) | 2000 |
| Rating output (W) | 1200 |
| Power factor | 0.6 |
| Rating output voltage (V) | 220 |
| Waveform | Battery mode (simulated sine wave), AC mode(sine wave) |
| AC Voltage Regulation | ±10% (Battery mode) |
| Rear output socket | 4 x Universal – Battery backup |
| Waveform | Simulated Sine Wave (Battery mode) |
| Line Mode | Synchronize with the utility |
| Rating frequency | 60Hz or 50 Hz ± 1 Hz |
| Battery Mode | Yellow flashing |
| Short circuit protection Line Mode | Fuse & Firmware protection |
| Short circuit protection Battery Mode | Firmware Protection |
| Overload protection Line Mode | 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately. |
| Overload protection Battery Mode | 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediately |
| Indicators AC mode | Green Lighting |
| Indicators Battery Mode | Yellow Flashing |
| Indicators Fault | Red Lighting |
| Alarm Battery Mode | Sounding every 10 Seconds |
| Alarm Low Battery | Sounding every Second |
| Alarm Overload | Sounding every 0.5 second |
| Alarm Fault | Continuously sounding |
| Full Protection | Overload, discharge, and Overcharge protection |
| Transfer Time | Typical 2-6ms, 10ms max. |
| Transfer Time | Typical 2-6ms, 10ms max. |
| Communication Interface | Optional RS232/RJ11 |
| Battery and runtime Rating | 2 X 12V/9AH |
| Recharge time – Typical | 6-8 hours recover to 90% capacity |
| Charge current | About 1A at normal mode. |
| Dimension, W X H X D (cm) | 22.5 X 12.5 X 39 |
| Net Weight (kgs) | 12.7KGS |
| Humidity | 0-90 % RH @ 0- 40°C (non-condensing) |
| Noise Level | Less than 45dB |
| Compatible with OS | Supports Windows® 2000/2003/XP/Vista/2008/7 |
| Communication interface | Elite 2000pro (N/A), Elite 2000ipro (USB/RJ11) |
Reviews
There are no reviews yet.