![](https://yamehsystems.com/wp-content/uploads/2023/06/71muIy-aIIL._AC_SX425_.jpg)
Mercury MI10000 Sine Wave Inverter
₦1,320,000.00
Mercury 150Amps Tubular Battery. Country of Origin: India
₦150,000.00
SKU:
MI10000PSI-1
Category: Mercury Inverter Battery
Related products
Mercury Elite220I, 220AH/12V Tall Tubular Battery
Specification
Nominal Voltage                                 12v Rated Capacity(20 Hour Rate)            200ahCharacteristics
20 Hour Rate (10.0A)      200AH 10 Hour Rate (18.4A)      184AH 5  Hour Rate  (32.0A)      160AH 1 Hour Rate   (120.0A)    120AH 15 Minute Rate (328A)     82.0AHMercury 150Amps Tubular Battery.
150 Ah capacity, 12V
Tubular plate Technology
Uniform distribution of positive active material for long life and superior performance
Latest innovation with thick tubular plates - best suited for areas with frequent and long power cut.
Next generation tall tubular battery with better charge acceptance and long Back up
Puncture-resistant polyethylene separator which minimize the possibility of internal short circuits
It has high purity, corrosion-resistant proprietary spine alloy composition for long battery life
Best Solution for areas with long and frequent power cuts
Easy maintenance with level indicators.
Mercury Elite 2000VA UPS
Rating input voltage | 2000 VA / 1200 W |
Rating input frequency | 60/50Hz (auto sensing) |
Input phase | Single-phase |
Input socket | With Fuse |
Cold Start (0 to 100% load) | Press the ON/OFF Switch |
Input Range (220V) | 140-300 |
Rating output(VA) | 2000 |
Rating output (W) | 1200 |
Power factor | 0.6 |
Rating output voltage (V) | 220 |
Waveform | Battery mode (simulated sine wave), AC mode(sine wave) |
AC Voltage Regulation | ±10% (Battery mode) |
Rear output socket | 4 x Universal – Battery backup |
Waveform | Simulated Sine Wave (Battery mode) |
Line Mode | Synchronize with the utility |
Rating frequency | 60Hz or 50 Hz ± 1 Hz |
Battery Mode | Yellow flashing |
Short circuit protection Line Mode | Fuse & Firmware protection |
Short circuit protection Battery Mode | Firmware Protection |
Overload protection Line Mode | 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately. |
Overload protection Battery Mode | 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediately |
Indicators AC mode | Green Lighting |
Indicators Battery Mode | Yellow Flashing |
Indicators Fault | Red Lighting |
Alarm Battery Mode | Sounding every 10 Seconds |
Alarm Low Battery | Sounding every Second |
Alarm Overload | Sounding every 0.5 second |
Alarm Fault | Continuously sounding |
Full Protection | Overload, discharge, and Overcharge protection |
Transfer Time | Typical 2-6ms, 10ms max. |
Transfer Time | Typical 2-6ms, 10ms max. |
Communication Interface | Optional RS232/RJ11 |
Battery and runtime Rating | 2 X 12V/9AH |
Recharge time – Typical | 6-8 hours recover to 90% capacity |
Charge current | About 1A at normal mode. |
Dimension, W X H X D (cm) | 22.5 X 12.5 X 39 |
Net Weight (kgs) | 12.7KGS |
Humidity | 0-90 % RH @ 0- 40°C (non-condensing) |
Noise Level | Less than 45dB |
Compatible with OS | Supports Windows® 2000/2003/XP/Vista/2008/7 |
Communication interface | Elite 2000pro (N/A), Elite 2000ipro (USB/RJ11) |
Reviews
There are no reviews yet.