Specifications
Power 6KVA / 4200W
Voltage range 176 ±5VAC~276 ±5VAC
Frequency 46~54Hz ±0.5Hz, or 56~64Hz ±0.5Hz auto-sensing
Input phase Single-phase
Power factor ≥0.98
Voltage range 220VAC ±1%
Output phase Single phase
se
Frequency 50Hz ±0.2% (battery mode)
THD < 2% (Linear load); < 6% (non-Linear load)
Overload 105%~130% 10min turn to Bypass mode,
> 130% 1s turn to Bypass mode
Crest factor 3:1 (max)
Waveform Pure sine wave
Transfer time 0ms (AC mode – Battery mode)
0ms (AC mode – Bypass mode)
Efficiency ≥88%
AC mode 5 cycles turn off the inverter, no transfer to Bypass,
provide alarm.
Battery mode 5 cycles turn off the inverter, provide an alarm.
Bypass mode Input fuse has blown or break action.
Battery Model 12V sealed lead acid maintenance-free
DC voltage 240VDC
Configuration 20x 12V/8.2AH
Backup time 20min (half load) / 7min (full load)
Charge current 1A (standard unit) / 5A (long time unit)
Recharge time 90% capacity after 8hrs charging
Communication Interface RS232; SNMP (optional)
Parallel Port Parallel availability for redundancy and load sharing up to three-units
LCD Indication Input voltage/frequency; battery voltage; output voltage/frequency; load watt/VA value & percent; inverter temperature; operation mode such as “on batt” or “on bypass”
LED Indication Green: normal operation; Yellow: warning condition
Red: abnormal operation
Noise level ≤ 55dB
Temperature 0~40˚C; 0 ~ 40˚C (storage temperature)
Humidity 0~95% (non-condensing)
Altitude < 1500m
Weight Net/Gross 89/104kg (standard unit); 34/48kg (long time unit)
Dimension (WxDxH) 270 x 570 x 720mm
Packaging (WxDxH) 370 x 670 x 940mm
Mercury Envy 6KVA Online UPS.
Description
Mercury 6kva Online UPS Single Phase MP9106S
Application: Small network, servers and other IT
equipment
High frequency and double conversion on-line technology
Fully digitized microprocessor control
Wide input voltage range
UPS startup without battery
Cold start
Advanced battery management
Advanced battery charge in UPS off mode
Lightning and surge protection
Short circuit and surge protection
Fan speed auto control when loads vary Optional extension battery pack
Load capacity display
Smart RS232 communication with monitoring software
Optional SNMP card slot
SKU:
ENVYRT6KVA
Categories: ENVY SERIES RACKMOUNT ONLINE UPS, Mercury
Description
Additional information
Brand |
---|
Reviews (0)
Be the first to review “Mercury Envy 6KVA Online UPS.” Cancel reply
Shipping & Delivery
Related products
Mercury Maverick 1050VA UPS
Specifications
KEY FEATURES
- Line Mode: Green lighting - Battery Mode :Yellow flashing - Fault: Red Lighting Audible Alarm: - Battery Mode: Sounding every 10 sec Battery low :Sounding every 1 sec Overload : Sounding every 0.5 sec Fault: Continuous sounding Environment: Humidity 0-90% relative Humidity 0-40°C (Non-condensing SPECIFICATIONS SKU: ME587EL0JUT5GNAFAMZ Certifications: Eco Friendly Color: BLACK Main Material: UPS Model: 1050VA Product Line: SHALOME Weight (kg): 7.8Mercury Maverick 1550VA UPS
Specification:
Model: – Capacity: 1550VA/930W Input : – Voltage 220-230VAC – Voltage Range 140-300 VAC – Frequency: 50 / 60Hz – Current:7.2A Max Output: – Voltage Regulation (Bat.Mode): +/-10% – Frequency :50 / 60Hz – Waveform: Simulated Sine wave Battery: – Battery Type: 12V / 8.2AH x2 – Charging ability: 6 hours recover to 90% capacity Transfer Time: – Typical:2-6ms Protection: Short circuit, Overload, Battery discharge and overcharge, Surge Protection Indications: – Line Mode: Greenlighting – Battery Mode : Yellow flashing – Fault: Red Lighting Audible Alarm: – Battery Mode: Sounding every 10 sec – Battery low: Sounding every 1 sec – Overload: Sounding every 0.5 sec – Fault: Continuous sounding Environment: – Humidity 0-90% relative Humidity 0-40°C (Non-condensing) – Noise Level : Less than 40dB – Dimension: 313 x129 x175Mercury 150Amps Tubular Battery
150 Ah capacity, 12V
Tubular plate Technology
Uniform distribution of positive active material for long life and superior performance
Latest innovation with thick tubular plates - best suited for areas with frequent and long power cut.
Next generation tall tubular battery with better charge acceptance and long Back up
Puncture-resistant polyethylene separator which minimize the possibility of internal short circuits
It has high purity, corrosion-resistant proprietary spine alloy composition for long battery life
Best Solution for areas with long and frequent power cuts
Easy maintenance with level indicators.
Mercury Elite 1200 Pro UPS. Country Of Origin: China
FEATURES
DSP technology for fast & smooth charging
Pure Sine Wave
Transformer Based
Auto sense intelligent charging (ASIC) adjustment
Highly robust & reliable Ideal for computers
User-selectable charging current
Generator compatible
Wide charging voltage range
Negligible battery water loss
Low Battery Warning
Overload Warning
Over Temperature protection
Short circuit protection
Backup indicator
Mercury Elite 2000VA UPS
Rating input voltage | 2000 VA / 1200 W |
Rating input frequency | 60/50Hz (auto sensing) |
Input phase | Single-phase |
Input socket | With Fuse |
Cold Start (0 to 100% load) | Press the ON/OFF Switch |
Input Range (220V) | 140-300 |
Rating output(VA) | 2000 |
Rating output (W) | 1200 |
Power factor | 0.6 |
Rating output voltage (V) | 220 |
Waveform | Battery mode (simulated sine wave), AC mode(sine wave) |
AC Voltage Regulation | ±10% (Battery mode) |
Rear output socket | 4 x Universal – Battery backup |
Waveform | Simulated Sine Wave (Battery mode) |
Line Mode | Synchronize with the utility |
Rating frequency | 60Hz or 50 Hz ± 1 Hz |
Battery Mode | Yellow flashing |
Short circuit protection Line Mode | Fuse & Firmware protection |
Short circuit protection Battery Mode | Firmware Protection |
Overload protection Line Mode | 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately. |
Overload protection Battery Mode | 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediately |
Indicators AC mode | Green Lighting |
Indicators Battery Mode | Yellow Flashing |
Indicators Fault | Red Lighting |
Alarm Battery Mode | Sounding every 10 Seconds |
Alarm Low Battery | Sounding every Second |
Alarm Overload | Sounding every 0.5 second |
Alarm Fault | Continuously sounding |
Full Protection | Overload, discharge, and Overcharge protection |
Transfer Time | Typical 2-6ms, 10ms max. |
Transfer Time | Typical 2-6ms, 10ms max. |
Communication Interface | Optional RS232/RJ11 |
Battery and runtime Rating | 2 X 12V/9AH |
Recharge time – Typical | 6-8 hours recover to 90% capacity |
Charge current | About 1A at normal mode. |
Dimension, W X H X D (cm) | 22.5 X 12.5 X 39 |
Net Weight (kgs) | 12.7KGS |
Humidity | 0-90 % RH @ 0- 40°C (non-condensing) |
Noise Level | Less than 45dB |
Compatible with OS | Supports Windows® 2000/2003/XP/Vista/2008/7 |
Communication interface | Elite 2000pro (N/A), Elite 2000ipro (USB/RJ11) |
Reviews
There are no reviews yet.